Classic British SparesKlempf British PartsBaxter CycleBritBike Sponsor SteadfastCyclesSRM EngineeringLucas Classic MotorcycleHepolite PistonsIndustrial tec supply

Upgrade your membership to: Premium Membership | Gold Membership | Life Membership | Vendor Membership | Site Sponsor Membership
Welcome to BritBike Forum!
Britbike forum logo
Member Spotlight
Howie
Howie
England
Posts: 163
Joined: September 2008
ShoutChat
Comment Guidelines: Do post respectful and insightful comments. Don't flame, hate, spam.
Search eBay for motorcycle parts in following countries
Australia, Canada, France, Holland, Italy, United Kingdom, USA
Thread Like Summary
Beach, joe czech, wbabojo
Total Likes: 3
Original Post (Thread Starter)
by joe czech
joe czech
so, i get my, new to me, 66 spitfire Mk2. first issue, the seat is just held in place by gravity and the weight of mt arse - no hardware. looking at the parts manual, i see (two each) #64-6054 bolt (5/16-26x1-1/16"), #24-8784 (lock) washer (5/16x5/8x.040") and #41-4036 spacers or "distance piece." have no problem getting the bolt and washer, but it looks like i'll have to fab the spacers. so, can anyone provide the dimensional data for the spacers, especially the length. i'm assuming the I.D. will fit the 5/16" bolt and the O.D. probably around 5/8" but need the length.

second, where does the lockwasher go - between the seat pan and the spacer, or under the head of the bolt, or ??? thanks for any help.
Liked Replies
by Gary E
Gary E
The spacer length (height) is 17/32" and the diameter is 3/4". The lock washer goes at the bolt head.
3 members like this
Job CycleBritish Cycle SupplyMorries PlaceKlempf British PartsPodtronicVintage MagazineBSA Unit SinglesBritBike SponsorBritish Tools & FastenersBritBike SponsorBritBike Sponsor






© 1996-2021 britbike.com
Powered by UBB.threads™ PHP Forum Software 7.7.5