Britbike forum Forums British Motorcycle specific Brands Triumph bulletin board Which hole in the hub

Which hole in the hub does the head of the spoke go in? The one with the dimple or the one without the dimple? 69 T100R QD hub. First time doing a Triumph wheel and not having a fun time. HELP!!

Thanks

Hope this helps;

https://vintagebikemagazine.com/tec...-and-650-to-1970-rear-wheel-rim-37-1007/

Here is more;

http://vintagebikemagazine.com/category/technical-articles/

Both, spokes go both ways when lacing. There should be a recess/dimple on the other hole on the reverse side. The spoke head locates in the recess.

So in your pic, left one goes in from the top. right one up from the bottom and then alternating.

Thanks for your reply