Britbike forum Forums British motorcycles in general Bsa gold star forum "Gold Star" flat track hub?

This just appeared on the British EBAY site,
https://www.ebay.co.uk/sch/i.html?_nkw=155284161372&_trksid=m5467.l1311

Wasn't someone searching for one of these a few montha ago?

Is it REAL B.S.A, or not?

Did it look like this?

I may bid on that hub as I want to build fit a 21” WM1 rim to it. Just need check a few details later today. Thanks for posting

Morgan, I posted sometime back about needing, (which I still do) a Dunlop 19" WM2 rear brakeless alloy wheel and rim for the BB32R Gold Star flat tracker I'm getting back to the track. Have the front, but you sure got my attention on your post. Thanks, Kevin

I'll bid on the hub tomorrow so keep your nose off 😅
The hub will be shipped to Central Wheel in B'ham UK and they will blast it and repaint and then fit their best 21" chrome rim made to spool hub using polished S/S 9 gauge spokes.

Boomer I won the bid and the spoolhub is being sent to Central wheel in UK for wheel building.

Can you please measure the spookes on your wheel?
is it 10 or 8 gauge spokes? 10= about 3,2mm, 8= about 4mm.

The spoke nipples what size is it 0,250" or 0.300" width?

Also can you see if the wheel offset? I reckon the rim centre would be slightly placed left to the hub centre. please check what you can see.

Thanks

Morgan, All of the information you need is in the Tech section under rim offsets. Lloyd L




Note: Sorry Morgan I posted that information on the A7/A10 forum















l