Britbike forum Forums British Motorcycle specific Brands Bsa bulletin board Could be correct B33 center stand

If the one on Mike's Classic website is correct then this one being offered to me looks correct except for the extra bit ... Otherwise looks to be the same shape?

for my 58 B33 project

Looks A65 ish which is not to say it won't fit a B33, the A65 had the extra leg, same stand without the leg went on the road going B25/B44.

Looks like this one too though
https://www.feked.com/bsa-centre-stand-a7-a10-with-lifter-arm-1958-onwards.html

The one in your first post has the better feet for rolling the bike on and off the stand, compare them to the others. These better feet are on the A65 and the Unit Singles. Really depends on total height and the distance between the 2 pivots as to whether it will fit.

The first one is for the Unit bikes. The feked one is correct for A7/A10 with the long foot assist to clear the muffler The one from Mikes is correct for your single as there is no muffler on the drive side so a long foot is not needed.


Bill B...