Aint she sweet.. Not complete yet but the motor is running. Tried first two kick with choke then no choke and voila baarroom.. Big Smile. see here. For you with good ears it is running with late ignition in this clip. I missed to set back the lever to high igintion.. but still nice eh..
It's not finished yeat but I have high hopes for the spring..
Gordon, Your rear drum is on the bike... Many thanks
4-spring from SRM with better adaptor with larger flange to give better support. SRM alloy preassure plate with needle roller bearing. Feels smooth and worked just fine on that little premiere run. However i was not supposted to ride it. I lost 4 nuts that was just put on by hand. found three after a stroll..
Congrats Morgan, looks and sounds great! My goldie has a similar clutch, although I had a serious problem with primary chain alignment, what was your experience with this ? My clutch adapter required re-machining to make it right. Anyone else out there with similar experience ?
Anyway, good luck, one more Goldie on the road soon !
Peter. 1974 Commando 850 1972 Trident T150T 1961 Goldie DBD34 1969 Benelli 250 sport special
Morgan.. in days of olde, when it was so cold..(in Michigan)... guys would remove the fork springs... then find an old set of tires, put in a lot of sheet metal screws in them... and go have fun... on the ice..!!
Thanks guys, I may take the bottle for spin... why not to Germany next summer if we go.. I need to have some parts made up and fit some kind of light to the bike and the apply for registration for the roades..