DM what sort of flow do you get from T150-T160 modified heads? I can get around 200cfm @ 28"W from the A65 head. I have a 32mm small port A65 head giving 160cfm, but fitting a 32mm round slide AMAL
or Mikuni restricts it, the Mikuni is worse because it has a long bell on it, I was wondering why it was worse than the AMAL
, just taking off the air hole casting on the entry of the AMAL
and blending it made it flow better, I think about 4-5cfm.
I'll try a short bell on the Mikuni and see what I get through it. Lectron carbs flow really well, they increase flow, but I don't have a small one, only old 38mm ones. I think my son in law is getting a flash new 3D printer