BritBike Forum logo
BritBike SponsorBritBike SponsorBritBike SponsorBritBike SponsorBritBike SponsorBritBike Sponsor SteadfastCyclesBritBike SponsorBritBike SponsorBritBike SponsorBritBike SponsorHepolite PistonsBritBike Sponsor
Upgrade to: Premium Membership | Gold Membership | Life Membership | Vendor Membership | Site Sponsor Membership
Member Spotlight
Richard Phillips
Richard Phillips
San Luis Obispo, CA
Posts: 755
Joined: August 2001
ShoutChat Box
Comment Guidelines: Do post respectful and insightful comments. Don't flame, hate, spam.
Search eBay for motorcycle parts in following countries
Australia, Canada, France, Holland, Italy, United Kingdom, USA
Random Gallery photo
a word from..
Manuals on DVD (Shipping included)
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 6 of 7 1 2 3 4 5 6 7
Re: 1968 Triumph T100R Daytona 500 - Super Project
Mark. L #741168 07/08/18 3:22 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Originally Posted by Mark. L
Hey Dr. Jon, that was a fine bit of surgery you did removing that bolt.....



Thanks Mark ! Now, to look through my stash and see if I can find a decent 12 degree AA unit. I do have a Pazon ignition for it but am leaning toward points for initial startup and running right now.


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Support Your #1 BritBike Forum!

Check out British motorcycles for sale: British Motorcycles on e-Bay UK, British motorcycles on e-Bay North America
Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #741175 07/08/18 4:11 pm
Joined: Jan 2018
Posts: 202
Likes: 4
Britbike forum member
Offline
Britbike forum member
Joined: Jan 2018
Posts: 202
Likes: 4
I'm putting a Pazon in my 71 T100R, I was hoping to have the bike on the road about a month ago, but some other non bike related issues happened, what about clutch adjustments, I have new plates and springs and have it pretty much straight, just how much can it be rode without the primary put back on if I want to do some tweaking to the clutch

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #741187 07/08/18 6:12 pm
Joined: Dec 2006
Posts: 305
Britbike forum member
Offline
Britbike forum member
Joined: Dec 2006
Posts: 305
Originally Posted by Jon W. Whitley
Originally Posted by Mark. L
Hey Dr. Jon, that was a fine bit of surgery you did removing that bolt.....



Thanks Mark ! Now, to look through my stash and see if I can find a decent 12 degree AA unit. I do have a Pazon ignition for it but am leaning toward points for initial startup and running right now.



Ive got a drawer full of advance units. Let me see if I can find one for you.


"I don't want a pickle. I just want to ride on my motor-cicle." Arlo Guthrie
Triumphs, BSA's, Nortons, Guzzis, Harleys & a few others.
Re: 1968 Triumph T100R Daytona 500 - Super Project
TBolt72 #741239 07/09/18 1:19 am
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Originally Posted by TBolt72
[quote=Jon W. Whitley]


Ive got a drawer full of advance units. Let me see if I can find one for you.



Wow, that's awesome TBolt72 ! I have one in hand and the cam is badly pitted.


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #741337 07/09/18 11:32 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Cleaned up and installed new oil seal E4568. Didn't have to order one, as I just happened to have a few on hand !


[Linked Image]

[Linked Image]

[Linked Image]


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #741351 07/10/18 1:16 am
Joined: Dec 2006
Posts: 305
Britbike forum member
Offline
Britbike forum member
Joined: Dec 2006
Posts: 305
[Linked Image]

[Linked Image]

[Linked Image]

$20 plus shipping g.


"I don't want a pickle. I just want to ride on my motor-cicle." Arlo Guthrie
Triumphs, BSA's, Nortons, Guzzis, Harleys & a few others.
Re: 1968 Triumph T100R Daytona 500 - Super Project
TBolt72 #741486 07/11/18 10:16 am
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Originally Posted by TBolt72
[Linked Image]


$20 plus shipping g.



Thanks for looking for the advance unit and posting the pics TBolt72. I have found a decent one in my stash.


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #743553 07/29/18 5:08 pm
Joined: Feb 2010
Posts: 354
Britbike forum member
Offline
Britbike forum member
Joined: Feb 2010
Posts: 354
Jon Glad to see things are still moving forward. It looks good.


57 A10 GF
61 A7
61 A10 GF
63 A10 SR
76 CB 125 Honda
76 FLH
2012 FLHTP
Re: 1968 Triumph T100R Daytona 500 - Super Project
Red Lapierre #743554 07/29/18 5:30 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Thanks Red. I am working on the gas tank now as well as the oil tank and side cover. I should have the AA unit installed in the next day or two.


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #743781 07/31/18 12:49 pm
Joined: Jan 2006
Posts: 7,174
Likes: 52
Britbike forum member
Offline
Britbike forum member
Joined: Jan 2006
Posts: 7,174
Likes: 52
Sure is looking good!

BSA harness out in today's post...


GrandPaul (does not use emoticons)
Author of the book "Old Bikes"
Too many bikes to list, mostly Triumph & Norton, a BSA, & some Japanese
"The Iron in your blood should be Vintage"
Re: 1968 Triumph T100R Daytona 500 - Super Project
GrandPaul #743903 08/01/18 10:04 am
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Originally Posted by GrandPaul
Sure is looking good!

BSA harness out in today's post...



Thank you x 2 Paul !


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #743929 08/01/18 2:23 pm
Joined: Jan 2006
Posts: 7,174
Likes: 52
Britbike forum member
Offline
Britbike forum member
Joined: Jan 2006
Posts: 7,174
Likes: 52
Missed the collection time at my neighborhood drop off yesterday, so you'll likely receive it Saturday.


GrandPaul (does not use emoticons)
Author of the book "Old Bikes"
Too many bikes to list, mostly Triumph & Norton, a BSA, & some Japanese
"The Iron in your blood should be Vintage"
Re: 1968 Triumph T100R Daytona 500 - Super Project
GrandPaul #744078 08/02/18 2:27 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Originally Posted by GrandPaul
Missed the collection time at my neighborhood drop off yesterday, so you'll likely receive it Saturday.



No Worries, Saturday is just fine !


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #744568 08/05/18 11:08 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Proper 12 degree AAU installed as well as the points plate. This was done after bringing the assembly to 38 degrees BTDC, confirmed with both valves closed on RH cylinder, pointer on primary cover pointing to line on alternator rotor aaand timing tool dropped in slot in crankshaft located at the timing plug at the rear of the cylinders.


Getting closer !!


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #748507 09/09/18 3:46 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Slowly but surely getting things done. Next task is the oil tank.


Gas tank with base coat of silver.

[Linked Image]


Side cover/toolbox stripped and getting ready for some filler to be applied. I hammered most of the deep gash/dent out from the backside.

[Linked Image]

[Linked Image]


A PO had cut the middle of the toolbox out with snips or something facepalm I just used my Dremel to clean up the jagged edges and leave it be.

[Linked Image]


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #749081 09/13/18 11:32 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
I got the oil tank stripped the other day I got some more work done today on both the side cover and oil tank.

Here is the oil tank from this bike and what I have to work with. It has had a rough life !

[Linked Image]

[Linked Image]

[Linked Image]


Stripped of paint

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]


Primer applied while it waits for the Bondo work

[Linked Image]

[Linked Image]





Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #749084 09/13/18 11:40 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Got the Bondo applied. There are two layers applied so far to the large dent on the oil tank and I will do another layer on it tomorrow for good measure. There is quite a bit of sanding that has been done up to this point !

[Linked Image]

[Linked Image]

[Linked Image]


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #749131 09/14/18 11:57 am
Joined: Nov 2010
Posts: 2,729
Likes: 5
#irideslow
Offline
#irideslow
Joined: Nov 2010
Posts: 2,729
Likes: 5
Lookin' good, Jon! The joys of salvaging these old bikes, bit by bit.

Re. Bondo, maybe you do this already ... to cut down on sanding, I use a SurForm file before the Bondo is fully hardened, to shave down the excess before sanding. HTH smile


Kurt

-- Don't believe everything you think.
Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #749136 09/14/18 1:46 pm
Joined: Feb 2010
Posts: 354
Britbike forum member
Offline
Britbike forum member
Joined: Feb 2010
Posts: 354
Yes Jon it looking good I know it has not been easy. Red


57 A10 GF
61 A7
61 A10 GF
63 A10 SR
76 CB 125 Honda
76 FLH
2012 FLHTP
Re: 1968 Triumph T100R Daytona 500 - Super Project
Red Lapierre #749141 09/14/18 2:13 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Originally Posted by kurt fischer
Lookin' good, Jon! The joys of salvaging these old bikes, bit by bit.

Re. Bondo, maybe you do this already ... to cut down on sanding, I use a SurForm file before the Bondo is fully hardened, to shave down the excess before sanding. HTH smile



Thanks Kurt ! I do have the files to cut the Bondo down but just using 80 grit on it for this job for starters.



Originally Posted by Red Lapierre
Yes Jon it looking good I know it has not been easy. Red



Thanks Red. Not easy like you say but I'm enjoying it !


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #749438 09/17/18 12:32 am
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
Coating the oil tank with sandable filler primer.

[Linked Image]


Side cover first coat of self-etching primer.

[Linked Image]


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #750267 09/24/18 7:34 am
Joined: Jun 2002
Posts: 10,046
Likes: 1
Britbike forum member
Offline
Britbike forum member
Joined: Jun 2002
Posts: 10,046
Likes: 1
Hi Jon,

Post 713091.

Originally Posted by Jon W. Whitley
Test fitting the coils to the frame. I found a set of coils with the 99-1052 clips. With the standard spacers, they cause the largest part of the coils to contact the gas tank recesses. This is with the 2.5 gallon U.S. spec tank. I like this setup though.

[Linked Image]

[Linked Image]

'Fraid I've only just seen this post; frown advance apologies if you've solved the problem already.

An educated guess says the coils in your pictures are Lucas 17M12 or pattern? When I was building up my T100, I also encountered problems fitting a US-market tank over 'em. frown Afaict, the problem is - certainly on late-1960's US-market tanks - Triumph sized the "gas tank recesses" for the "Siba 32,000" coils listed in the late-1960's parts books; however, while 17M coils appear to have been Lucas's '70-on response, the Lucas coils have the ridge around the terminals end that the Sibas don't appear to have.

That said, I didn't fiddle around too long with a US-market tank; the UK & General Export tank has bigger recesses (the Lucas MA coils are fatter), as well as being an Imperial gallon bigger. Unlike other Triumph ranges, certainly '67-on C-range UK&GE and US tanks don't look dissimilar (unless you have the two side-by-side) so the bigger tank doesn't look obviously out of place on a US-market bike.

Originally Posted by Jon W. Whitley
standard spacers,

Nevertheless, even with the bigger tank/recesses, I still had fitting problems with what were then being peddled by the trade as "standard" spacers. facepalm In the end, I fiddled around under the tank for a ridiculously-long time (would've been quicker to take the engine out, measure and refit the engine cool ) to calculate the length of spacers that gave the same clearance between frame and coils and between coils and tank. This might also be an option with your bike's tank?

Btw, if the coils in your pictures are Lucas 17M12 or pattern, the "coil clips" in your picture aren't 99-1052. 99-1052 are sized for the fatter MA coils and, when used with the smaller 17M coils, the gap allows for some anti-vibe padding between coil and clip. Not sure what those similar-looking clips that actually fit 17M coils are, they weren't used on '70 UK&GE bikes with '70-on 17M coils; the British Cub parts company Greystone Enterprises sell 'em, so it's possible they were originally intended for mounting 17M coils on Cubs?

Hth.

Regards,

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #752788 10/14/18 11:26 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
I haven't been neglecting the Daytona and am still working the bodywork and painting of the sheet metal. Still need to do more work on all pieces and will post pics with the completed progress !!


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #806815 04/26/20 9:18 pm
Joined: Aug 2001
Posts: 6,632
Likes: 31
Britbike forum member
OP Offline
Britbike forum member
Joined: Aug 2001
Posts: 6,632
Likes: 31
I finally found time to get back to the Daytona, while waiting for parts to come in for my Commando and BSA A65F. I decided to clean up the primary and adjust the clutch. I didn't take a before pic but the rust buildup on the pressure plate was atrocious and the three adjuster nuts were screwed in with about 8 threads showing on each. So, I took it all back to the standard settings and we'll see how it works. I also cleaned the gasket surfaces and it is now ready to go back together. Not really much, but any and all work is a step closer to firing it up !!

[Linked Image from i.imgur.com]

[Linked Image from i.imgur.com]


Jon W.


1957 6T Thunderbird 650
1968 T100R Daytona 500
1971 TR6R Tiger 650
1970 BSA A65F 650
1955 Tiger 100 - Project
1971 BSA A65 650 - Project
1972 Norton Commando 750 "Combat"


"Every time I listen to AC/DC, so do my neighbors"

Re: 1968 Triumph T100R Daytona 500 - Super Project
Jon W. Whitley #807139 04/29/20 1:44 pm
Joined: Jan 2018
Posts: 202
Likes: 4
Britbike forum member
Offline
Britbike forum member
Joined: Jan 2018
Posts: 202
Likes: 4
Getting close n looking good, what are you going to use on the primary to seal it? My 71 Daytona is almost there,

Page 6 of 7 1 2 3 4 5 6 7

Moderated by  Richrd 

Link Copied to Clipboard
Home | Sponsors | Newsletter | Regalia | Calendar | Bike Project | BritBike Museum | Spiders Cartoons | DVD- Manuals & Parts books
Upgrade to: Premium Membership | Gold Membership | Life Membership | Vendor Membership | Site Sponsor Membership
Powered by UBB.threads™ PHP Forum Software 7.7.4