When I took my devimead timing side bearing apart the inner race had a convenient 45 degree flat on the crank side rim, after heating it popped off easily with a small chisel tapped into the bevel. When I fitted the new race I reground the bevel, glad I did , it needed to come off for a small shim to prevent the crank cheeks binding on the bearing outer, this had to be stoned a little for a few more thou relief. Although the same OD and ID the new bearing was a few thou longer than the original and a couple of subtle changes were needed to get the correct float on the ball part of the combi bearing.

71 Devimead, John Hill, John Holmes A65 750
56 Norbsa 68 Longstroke A65
Cagiva Raptor 650
MZ TS 250
The poster formerly known as Pod