Okay peeps,
This is the current status of my BSA B31.
I hope finnish te rebuilt before april 31st.
But i encounter several problems.
On are stearinghead bearings i bought tapperd bearing because the are better. But with this cowl plunger model thas a poblem because the bearings are a few mill thicker (3-4 mm each) and that meens the shrouds of the front springs are to short and the bolt holes of the won't align.
So i orderd new orginal ball bearings.
There are lot of other litle problems to over come.

Regards
Dick beerchug
[Linked Image]

web page


1954 BSA B31 plunger
1989 GL1500 Aspengate